OUR PRODUCT / CARDINAL® WEIGHT INDICATORS

DFWATEX2GD Weight Indicator

Weight indicator for areas classified as hazardous with protection methods according to:

ATEX II 2(2)G Ex ib [ib Gb] IIC T4 Gb for gases,
ATEX II 2(2)D Ex tb [ib Db] IIIC T197°C IP65 Db for dust.

Ideal for creating weighing systems, batching, and automation systems. EC-Type-Examination certificate according to Annex III (ATEX directive). CE-M approvable (OIML R-76 / EN 45501)

 

MAIN FEATURES

  • Waterproof 17-key numerical and functional keyboard.
  • LCD display with 6 25-mm high contrast digits, clearly visible even in poor lighting conditions and with low temperatures, and with 6 LEDs for showing the active functions.
  • IP68Satin finish stainless steel case.
  • Dimensions 264x174x115mm.
  • Suitable for use on the table, or wall.
  • Up to 10.000e or multirange 3 x 3000e @ 0,3 µV/e in CE-M approved version for legal for trade use.
  • Up to 1.000.000 displayable divisions with internal resolution up to 3.000.000 points.
  • Up to 8 signal linearization pointswith DINITOOLS (3 from keypad).
  • A/D 24-bit sigma-delta conversion, up to 200 conv./sec. autoselect.
  • Digital calibration and set-up from keyboard; Instrument management & configuration from PC with DINITOOLS.
  • Power supply through external module: with optional battery pack; or with optional power adapter connectable to mains at 230 Vac or at 24 Vdc.
  • Connection with up to 4 load cells having 350 Ohm input resistance.

FUNCTIONS

  • SCALE FUNCTIONS
    -Zeroing
    – Automatic Tare
    – Presettable Tare
    – ID1 and ID2 10-digit Codes
    – Print and data transmission commands
    – selectable function command
    – on/off switching.
  • SELECTABLE FUNCTIONING MODES
    – High Resolution Weighing x 10
    -Net/Gross or lb/kg conversion
    – Accumulation
    – Formula weighing
    – +/- Checkweighing
    – Counting
    (Max. resolution of 1.500.000 divisions).
    – In/Out Truck weighing
    – Hold
    – Peer-to-peer 
    (up to 4 remote connectable indicators).
    – Set Point Control (only in the DFWATEX2GDIO version combined with PW200XRDxxx and PW200IO options).
    – MODBUS serial protocol.
Need Help?

Related Products

Weighbridge
Tank/ Silo Weighing System
Checkweigher
Bench Scales, Counting Scales & Floor Scales
previous arrow
next arrow
Slider